Chambers

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut laoreet convallis magna eu tempor. Phasellus venenatis sagittis tellus, a laoreet turpis dignissim sit amet. Ut nec velit arcu, id tincidunt arcu. Sed ultrices nisl orci, at mattis enim. Curabitur eu risus sem. Nullam eget mauris ac metus semper auctor. Nulla eu lobortis enim. Curabitur eros tellus, venenatis sit amet semper malesuada, molestie eget massa. Sed id neque odio, ut hendrerit arcu. Maecenas viverra, ipsum nec tempor semper, quam tellus gravida est, et volutpat tortor massa viverra risus. Nulla facilisi. Cras bibendum magna a dui cursus malesuada. Praesent nec libero eu nisi elementum blandit. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Fusce nec justo mi. Etiam sit amet libero sed mauris consectetur tempor quis a urna.

The DA-24 ETNA is Dual burn-in chamber with 24 BiB slots.It is based on two independent thermal chambers with a 12 slots capacity each.Temperature range is -45°C to 180°C. Main Features: Dual burn-in chamber with 12 BiB slots each Optimized energy consumption Automatic Sliding doors with inflatable gasket Automatic BiB insertion/extraction at slot level Very compact High power dissipation High Reliability Easy accessibility Compatible with HD and HD/H BiB standards JEDEC standard JESD22-A105C compliant (Power and Temperature Cycling) Industry 4.0 compliant For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

Additional Info

  • Temperature ETNA: [-45°C to +18°C]
  • N° Slot 24
  • N ° Thermal Zone 2
  • Condensation Water
The QM-48 HD +150 is quad burn-in chamber with 24 BiB slots. It is based on four independent thermal chambers with a 12 slot capacity each, all of which are hot only.Main Features: 48 BiB Slots 4 independent thermal chambers with 12 BiB slots each Fixed BiB Racks Manual BiB insertion/extraction Compatible with HD and HD/H BiB standards Options: Temperature Range Extension: +175°C Option Temperature Range Extension: +210°C Option Customised BIB Rack for Existing or Custom BIB Standard DRV to BIB Architecure: 1:1 or 1:4 Description:The QM-48 is a quad burn-in chamber with a total capacity of 48 BiBs. Each chamber has a temperature range of 20 °C above ambient temperature to 150 °C, and achieves temperature ramp down by forcing ambient air into the chamber. The rear wall of each chamber has 12 slots, mechanically suitable for a single HD or HD-H interconnection board (Extender Card). On the rear side of each chamber there is the Driver Cabinet equipped with a rack for the test sub-system. The rack has 12 slots with a 50…

Additional Info

  • Temperature BI: [+50°C to +150°C], BI: [+50°C to +175°C] (Hot Option), BI: [+50°C to +210°C] (Hot Option)
  • N° Slot 48
  • N ° Thermal Zone 4
  • Condensation Water
Since 2003, the EDA engineering division has been producing the most traditional temperature stress system: thermal shock in air at two fixed temperatures. The market’s constant request to increase load capacity to the maximum while maintaining very high thermal performance led EDA Industries to study new solutions, arriving at the production of a machine with useful rack volume of 440 l; the robustness of the system and the ease of monitoring and management provided by the chamber synoptic platform developed on the Siemens S7 platform have made this product very much appreciated and widely used in the qualification of components for aerospace. We have recently developed a GEN 2 version, with increased performances: Main Features: Temperature range (hot chamber) +40°C / +220°CTemperature range (cold chamber) -80°C / +60°C Basket internal Volume: 315 liters Basket Max load capacity: 80Kg Compliance with MIL-STD-883K METHOD 1010.9 TEMPERATURE CYCLING Letters A, B, C and F For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

Additional Info

  • Temperature TC: [+50°C / +190°C hot chamber] [-75°C / +50°C cold chamber]
  • N ° Thermal Zone 2
  • Condensation Water
The ERIS is Single burn-in chamber.It can be factory-configured to run Hot&Cold or THB test, resulting in different thermal an denvironmental system specification. Main Features: One 300 liters chamber Temperature set from 50°c to 180°C Options: THB option: Relative Humidity control in the range [30% - 98%] HC Hot and Cold Option: Temperature set from -40°c to 180°C For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

Additional Info

  • Temperature ERIS HC: [-40°C to +180°C], ERIS THB: [50°C to +180°C] or [+50°C to +95°C with Humidity], ERIS: [+50°C to +180°C]
  • N ° Thermal Zone 1
  • Condensation Water
The OPUS 100 is a burn-in system that can be composed by 1/2/4 chambers with 12 BiB slots each.Each Chamber can be factory-configured to run OLT or PTC test type, resulting in different thermal system specification. System Architecture: The Test Electronics is based on the powerful EDA VBTS system, with one PTDM that drives up to 6 BIB/LOAD slots. The DUT Board (BIB) is inserted in the enviromental chameber, and typically host up to 4 DUTs. The LOAD Board contains all the Loads that are usually big and cannot stand high/low temperatures. This board is inserted in the driver cabinet, that is thermally controlled to maintain room temperature. Main Features: 12 BiB Slots per chamber for a modular construction of a 12/24/48 slots system. 1/2/4 independent thermal chambers,with 12 BiB slots each, 1000 liters each Fixed BiB Racks Manual BiB insertion/extraction. Compatible with OPUS BiB standards External Cooling Unit for a reduced test floor area. For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

Additional Info

  • Temperature OPUS: [-55°C to +180°C]
  • N ° Thermal Zone 1, 2, 4
  • Condensation Water
The SM-24 HD +150 is Single burn-in chamber with 24 BiB slots.It is based on a single thermal chambers with a 24 slots capacity each. Main Features: 24 BiB Slots 1 thermal chamber,with 24 BiB slots, 1000 liters Fixed BiB Racks Manual BiB insertion/extraction. Compatible with HD and HD/H BiB standards For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

Additional Info

  • Temperature BI: [+50°C to +150°C], BI: [-40°C to +150°C] (Cold Option), BI: [-40°C to +175°C] (Cold and Hot Option), BI: [+50°C to +175°C] (Hot Option)
  • N° Slot 24
  • N ° Thermal Zone 1
  • Condensation Air, Water
The DM-48 HD +150 is Dual burn-in chamber with 48 BiB slots.It is based on two independent thermal chambers with a 24 slots capacity each. Main Features: 48 BiB Slots 2 independent thermal chambers,with 24 BiB slots each, 1000 liters each Fixed BiB Racks Manual BiB insertion/extraction. Compatible with HD and HD/H BiB standards For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

Additional Info

  • Temperature BI: [+50°C to +150°C], BI: [+50°C to +175°C] (Hot Option)
  • N° Slot 48
  • N ° Thermal Zone 2
  • Condensation Water
The DM-24 HD +150 is Dual burn-in chamber with 24 BiB slots.It is based on two independent thermal chambers with a 12 slots capacity each. Main Features: 24 BiB Slots 2 independent thermal chambers,with 12 BiB slots each, 462 liters each Fixed BiB Racks Manual BiB insertion/extraction. Compatible with HD and HD/H BiB standards Options: Chamber2 can be configured for -40°C COLD OPTION. For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

Additional Info

  • Temperature BI: [+50°C to +150°C], BI: [-40°C to +150°C] (Cold Option), BI: [-40°C to +175°C] (Cold and Hot Option), BI: [+50°C to +175°C] (Hot Option)
  • N° Slot 24
  • N ° Thermal Zone 2
  • Condensation Water
The DA-24 HD +150 is Dual burn-in chamber with 24 BiB slots.It is based on two independent thermal chambers with a 12 slots capacity each.Chamber2 can be configured for -40°C COLD OPTION. Main Features: 24 BiB Slots 2 independent thermal chambers with 12 BiB slots each, 462 liters each Fixed BiB Racks Automatic BiB insertion/extraction, single slot. Compatible with HD and HD/H BiB standards For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

Additional Info

  • Temperature BI: [+50°C to +150°C], BI: [-40°C to +150°C] (Cold Option), BI: [-40°C to +175°C] (Cold and Hot Option), BI: [+50°C to +175°C] (Hot Option)
  • N° Slot 24
  • N ° Thermal Zone 2
  • Condensation Water
The QM-24 HD +150 is quad burn-in chamber with 24 BiB slots. It is based on four independent thermal chambers with a 6 slot capacity each, all of which are hot only. Main Features: 24 BiB Slots 4 independent thermal chambers with 6 BiB slots each Fixed BiB Racks Manual BiB insertion/extraction Compatible with HD and HD/H BiB standards Description:The QM-24 is a quad burn-in chamber with a total capacity of 24 BiBs. Each chamber has a temperature range of 20 °C above ambient temperature to 150 °C, and achieves temperature ramp down by forcing ambient air into the chamber. The rear wall of each chamber has 6 slots, mechanically suitable for a single HD or HD-H interconnection board (Extender Card). On the rear side of each chamber there is the Driver Cabinet equipped with a rack for the test sub-system. The rack has 6 slots with a 65 mm pitch, each slot has a power connector connected to bus bars for supplying 48 V power to the test sub-system modules. The Drivers Cabinet is…

Additional Info

  • Temperature BI: [+50°C to +150°C], BI: [+50°C to +175°C] (Hot Option)
  • N° Slot 24
  • N ° Thermal Zone 4
  • Condensation Water
In 2005, one of the world’s leading manufacturers of railway signal control equipment asked us to go beyond the supply of a machine capable of satisfying the thermal gradient and temperature range requirements with the goal of obtaining an integrated system capable of automating tests ... and the result was a “custom” ESS TC2.6. Since then, the machine’s feature of automation and “flexible” electronics capable of adapting to the processes of multiple product lines has made it one of the most popular and successful systems produced by IES, the EDA Industries’ engineering division for Enviromental Chambers. Main Features: One 2600 litres thermal chamber Automatic pneumatic UUT Rack insertion/extraction Custom test electronic cabinet (Simulator Rack) Dryer -30 °C to +90°C (with Contact Fixture) -70 °C to +180°C (extended range without fixture) For direct request, pls contact This email address is being protected from spambots. You need JavaScript enabled to view it.

Additional Info

  • Temperature ESS: [-30°c to +90°C with Fixture], ESS: [-70°c to +180°C without Fixture]
  • N ° Thermal Zone 1
  • Condensation Water
top