Test Equipment

In addition to the test systems and burnin, EDA Industries produces a series of equipment to manage the other operations of the electronic devices' qualification and production cycles.
Those products are:

  • Engineering Test Station
  • Pre BurnIn Test Station
  • Test During Loading

 

ENGINEERING TEST STATION (ETS) 

Description: 
ETS stays for Engineering Test Station.
It is meant to be used for Application Development, BIB design debug, Test program verification, etc.
It gives a direct access to the top of the Burn-In Board to easily insert/remove device, running/stopping tests, measuring voltages, currents, waveform, etc. directly on the BIB while the test is running.
The top roof/tray of the equipment can comfortably hold devices, oscilloscopes, multimeter, logical analyser or other measurement instrumentation or tools.
Alternatively, instruments can be on a rack positioned aside the PBTS.
The user can stand in front of the BIB, or sit in front of the display/keyboard.

Electronic: 
The ETS can be equipped with any EDA test electronic, like the latest UBTS/VBTS, MBTSIII, DFTB, with options like:
Individual DUT Temperature ControlParametric Test capabilityHigh Power option.
ETS can be also equipped with EDA former electronics, like DBTS, HBTS, MBTS, or even with CUSTOM ELECTRONIC.

Software: 
The system's SW is the EDA HD6, in its Basic or Enhanced version. 
It is the same SW running in the BurnIn System (oven), of course without the control of any chamber.
Other SW packages are usually installed in the ETS, like EDA DataViewerEDA Test Plan EditorEDA Pattern Converter, etc...

For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

 

PRE-BURNIN TEST STATION (PBTS) 

Description: 
PBTS stays for Pre-Burinin Test Station.
It is meant to be used for BIB verification before the BurnIn.
The test can be done AFTER the BIB loading, or DURING the BIB manual loading, using this equipment as a Manual Loading Station with Functional and/or Parametric Test.
It gives a direct access to the top of the Burn-In Board to easily insert/remove devices to troubleshoot eventual DUT loading issue, BIB or fuses issues, etc.
This operation can be executed during the normal runtime of the OVEN, getting the BIB ready and fully functional for the next run, maximising the throughput, optimizing the operations and reducing the Oven set up time.
The top roof/tray of the equipment can comfortably hold devices to be loaded, and other trays to sort out the failing devices.
The user can stand in front of the BIB, or sit in front of the display/keyboard.
A PBTS used as Manual Loading Station can be equipped with a foot-pedal to start a Test During Loading by using the foot while the hands are used for DUT handling.

Electronic:
The PBTS can be equipped with any EDA test electronic, like the latest UBTS/VBTS, MBTSIII, DFTB, with options like:
Individual DUT Temperature ControlParametric Test capabilityHigh Power option.
ETS can be also equipped with EDA former electronics, like DBTS, HBTS, MBTS, or even with CUSTOM ELECTRONIC.

Software:
The system's SW is the EDA HD6 (in its Basic or Enhanced version) or the Manual Loading Station dedicated SW. 
HD6 is the same SW running in the BurnIn System (oven), of course without the control of any chamber, with additional functions for PBTS.

For info, pls send a direct request to This email address is being protected from spambots. You need JavaScript enabled to view it..

 

 

Contact EDA Industries

Please use the below form to send a message or a query.
Fields marked with * are required
top